Light-weight racing parts since 1990

HomeXC-XCM-GF-Enduro ProductsBikesANAKIN FULL 29" Carbon Monocoque

Go to

bici anakin full xcr18
telaio anakin full tre quarti8
telaio anakin full retro6
telaio anakin full biella6
telaio anakin full s37
telaio anakin full carro7
telaio anakin full sottoscatola6
telaio anakin slk logo
telaio anakin slk sterzo8
We are the first company to produce a 29” monocoque frame in Italy. With all respect to the typical Italian tube to tube construction, the monocoque system offers a notable weight riduction, a more constant production quality and an improved load distribution along the tubes. Production times are greatly reduced resulting in quicker delivery times
The FRM forks are supplied with 1,5” Taper steerer tube only. The steerer tube base has a diameter of 40mm which joins to a diameter of 28,6mm in the upper part of the tube. The tube is lathe worked from a bar of Scandium aluminium alloy
Post-Mount type brake caliper assembly has already taken the place of the older International Standard on forks whilst on frames this change-over is taking place now. The FRM Anakin, Galaxy, Be Active29 and 8HP Full use the Post-Mount standard for 160mm discs. The brake caliper is fixed directly to the frame without the use of an adaptor
The Press-Fit type bottom brackets use plastic bearing cups for cranks with 24-25mm axles. MTB Press-Fit bottom brackets are 89,5mm (symmetrical) or 92mm (asymmetrical) wide. FRM carbon fibre frames feature a 89,5mm Press-Fit bottom bracket

ANAKIN FULL 29" Carbon Monocoque

Frame specs:

  • 100% Made in Italy
  • Monocoque frame & stays, manufactured under FRM licence. Proprietary design of frame and moulds
  • High Modulus Carbon Fibre, with optimised unidirectional layering
  • UniFlex suspension system. No pivot between upper and lower stays. Higher rigidity and lighter weight
  • Rear wheel travel: 100mm (rate wheel trave / shock stroke: 2,7)
  • Chainstays: short at 438mm.
  • BB height: low at 312mm
  • Rear shock: Marzocchi Roco Lite (165mm)
  • Post-Mount brake support
  • Dropouts: replaceable E-Thru 12x142mm (12mm bolt axle)
  • S3 Direct-Mount front derailleur adaptor
  • Internal routing of rear brake and both derailleurs
  • Headset: FRM D-Set 1,5” Taper included
  • Bottom Bracket: Press-Fit 89,5mm (41x89,5mm)
  • Hard anodised suspension axles in light alloy
  • Full-ball type bearings (Enduro Max) with O-Ring shields
  • Seatpost Dia.: 31,6mm
  • Seatpost collar: FRM SC35 Ti. included
  • Sizes: Small/ Medium - Large/X-Large
  • Finish: perfect out of the mould finish with no paint
  • Rider weight limit: 95kg

Weight: 1.850g. (S/M) with rear shock + E-Thru axle 38g

WARNING: this product is designed for XC style riding. It is not intended for use in Freeride, Downhill, Ramp Riding, Stunt, Dirty Jump or any similar activity

BIKES AVAILABLE IN XCR1 (XX1) XCR2 (X01) OR XCR3 (X9/X7) CONFIGURATION. SEE SPECS BELOW

Price:
Sales price: 5729,00 €
Size

Version

Stem

Crankset

  • XCR1
  • XCR2
  • Geometry
  • XCR3
  • Download

  • FRAME: FRM monocoque Anakin Full 29” with Marzocchi Roco Lite shock
    FORK: FRM Air-Way 32 Super Race 100mm. 1,5” taper. QR15
    WHEELS: FRM Venus XC Carbon 29”
    OPTION: Venus XC Carbon Tubular+Challenge One (-100g)
    Venus XC Marathon (+95g)
    AXLES: front QR15. Rear E-Thru 12x142mm
    SPOKES: Sapim CX Ray
    CRANKSET: FRM CU3-M11 Single Osymetric 34t.
    SHIFTER/REAR DER.: Sram XX1
    CHAINGUIDE: FRM KCU Carbon. Direct Mount S3
    COGSET: Sram XX1 10-42
    CHAIN: KMC X11 L. Hollow cages
    HANDLEBAR: FRM Web-Bar 129 Carbon Low Profile+Silicone grips
    STEM: FRM HS-M13 Ti. (70-80-90-100-110mm)
    HEADSET: FRM D-Set 1,5” Taper
    BRAKES: Formula R1 Racing. Rotors 160-160mm
    SEATPOST: FRM ST-M10 Ti. 27,2x350mm
    SEAT COLLAR: FRM SC32 Ti.
    SADDLE: FRM Black Hole
    TIRES: WTB Nano Race 29"x2,1"+FRM Sealant

    Rider weight limit: 90kg

    WEIGHT w/out pedals: Kg 9,0

    • The contents are subject to change without notice due to product improvements and specification changes
    • Final production version may and will differ from appearance of product shown on this page

  • FRAME: FRM monocoque Anakin Full 29” with Rock Shox Monarch rear shock
    FORK: FRM Air-Way 32 XC Team 100mm. 1,5” taper. QR15
    WHEELS: FRM Urano XC Marathon
    AXLES: front QR15. Rear X-12
    SPOKES: Sapim Laser 2,0-1,5-2,0mm
    CRANKSET: FRM CU3-M11 Single Syncro-Ring 32t.
    ROTOR & REAR DER.: Sram XO1
    CHAINGUIDE: No chainguide required with Syncro-Ring
    COGS: SRAM X01 10-42
    CHAIN: KMC X11 L. Hollow pins
    HANDLEBAR: FRM Web-Bar 329 Carbon Low Profilw+Silicone grips
    STEM: FRM HS-M13 Ti. (70-80-90-100-110mm)
    HEADSET: FRM D-Set 1,5” Taper
    BRAKES: Avid X01 Carbon. Rotors 160-160mm
    SEATPOST: FRM ST-M10 Ti. 27,2x350mm
    SEAT COLLAR: FRM SC32 Ti.
    SADDLE: FRM Aspen Ti.
    TIRES: WTB Nano Race 29"x2,1"+FRM Sealant

    Rider weight limit: 95kg

    WEIGHT w/out pedalis Kg 9,25

    • The contents are subject to change without notice due to product improvements and specification changes
    • Final production version may and will differ from appearance of product shown on this page

  • P1 P2 A B C D E F a b Cyclist height
    SMALL/MEDIUM 450 342 585 438 1.090 312 95 507 71,0° 73,6° from 165 to 179cm
    LARGE/X-LARGE 590 442 620 438 1.124 312 115 507 71,0° 73,6° from 180 to 189cm

  • FRAME: FRM monocoque Anakin Full 29” with Rock Shox Monarch rear shock
    FORK: Rock Shox Reba RL 1,5" QR15
    WHEELS: FRM Urano XC
    AXLES: front QR15. Rear X-12
    SPOKES: Sapim Race 2,0-1,8-2,0mm
    CRANKSET: FRM CU3-M NS 36-22d.
    SHIFTERS & REAR DER.: Sram X7 trigger & X9
    FRONT DER.: SRAM X7 S3
    COGS: SRAM 11-36
    CHAIN: KMC XD10
    HANDLEBAR: Kozyak Pro Flat 660mm. 9°+Foam Grips
    STEM: FRM HS-M13 (70-80-90-100-110mm)
    HEADSET: FRM D-Set 1,5” Taper
    BRAKES: Avid Elixir 5. Rotors 160-160mm
    SEATPOST: FRM ST-M10 27,2x350mm
    SEAT COLLAR: FRM SC32
    SADDLE: FRM Aspen
    TIRES: WTB Nano Race 29”+FRM Sealant

    Rider weight limit: 95kg

    WEIGHT w/out pedalis Kg 10,1

    • The contents are subject to change without notice due to product improvements and specification changes
    • Final production version may and will differ from appearance of product shown on this page

Related Products

VENUS XC CARBON 29"
SC35 / SC32 Ti.
SILICONE GRIPS Off-centre
ANAKIN SLK 29" Frame

Contacts

FRM Bike Technology S.r.l.

Via E. Mattei 18/A

48025 Riolo Terme (RA)

Italy

Tel. +39 0546 70310
Fax. +39 0546 74623