Light-weight racing parts since 1990

Telaio Anakin SLK part2.jpgTelaio Anakin SLK part2.jpg
Telaio Anakin SLK part2.jpgTelaio Anakin SLK part2.jpg
Telaio Anakin SLK part2.jpgTelaio Anakin SLK part2.jpg
Telaio Anakin SLK part2.jpgTelaio Anakin SLK part2.jpg
Telaio Anakin SLK part2.jpgTelaio Anakin SLK part2.jpg
Telaio Anakin SLK part2.jpgTelaio Anakin SLK part2.jpg
Telaio Anakin SLK part2.jpgTelaio Anakin SLK part2.jpg
Telaio Anakin SLK part2.jpgTelaio Anakin SLK part2.jpg
We are the first company to produce a 29” monocoque frame in Italy. With all respect to the typical Italian tube to tube construction, the monocoque system offers a notable weight riduction, a more constant production quality and an improved load distribution along the tubes. Production times are greatly reduced resulting in quicker delivery times
The FRM forks are supplied with 1,5” Taper steerer tube only. The steerer tube base has a diameter of 40mm which joins to a diameter of 28,6mm in the upper part of the tube. The tube is lathe worked from a bar of Scandium aluminium alloy
The Press-Fit type bottom brackets use plastic bearing cups for cranks with 24-25mm axles. MTB Press-Fit bottom brackets are 89,5mm (symmetrical) or 92mm (asymmetrical) wide. FRM carbon fibre frames feature a 89,5mm Press-Fit bottom bracket
Post-Mount type brake caliper assembly has already taken the place of the older International Standard on forks whilst on frames this change-over is taking place now. The FRM Anakin, Galaxy, Be Active29 and 8HP Full use the Post-Mount standard for 160mm discs. The brake caliper is fixed directly to the frame without the use of an adaptor

ANAKIN FULL 29" Carbon Monocoque Frame

  • 100% Made in Italy
  • Monocoque frame & stays, manufactured under FRM licence. Proprietary design of frame and moulds
  • High Modulus Carbon Fibre, with optimised unidirectional layering
  • UniFlex suspension system. No pivot between upper and lower stays. Higher rigidity and lighter weight
  • Rear wheel travel: 100mm (rate wheel trave / shock stroke: 2,7)
  • Chainstays: short at 438mm.
  • BB height: low at 312mm
  • Rear shock: Marzocchi Roco Lite (165mm)
  • Post-Mount brake support
  • Dropouts: replaceable E-Thru 12x142mm (12mm bolt axle)
  • S3 Direct-Mount front derailleur adaptor
  • Internal routing of rear brake and both derailleurs
  • Headset: FRM D-Set 1,5” Taper included (Red)
  • Bottom Bracket: Press-Fit 89,5mm (41x89,5mm)
  • Hard anodised suspension axles in light alloy
  • Full-ball type bearings (Enduro Max) with O-Ring shields
  • Seatpost Dia.: 31,6mm
  • Seatpost collar: FRM SC35 Ti. included (Red)
  • Sizes: Small/ Medium - Large/X-Large
  • Finish: perfect out of the mould finish with no paint
  • Rider weight limit: 95kg

Weight: 1.850g. (S/M) with rear shock + E-Thru axle 38g

WARNING: this product is designed for XC style riding. It is not intended for use in Freeride, Downhill, Ramp Riding, Stunt, Dirty Jump or any similar activity

Price:
Sales price: 3584,00 €
Size

  • P1 P2 A B C D E F a b Cyclist Height

    SMALL/

    MEDIUM

    450 342 585 438 1.090 312 95 507 71,0° 73,6° from 165 to 179cm

    LARGE/

    X-LARGE

    490 342 620 438 1.124 312 115 507 71,0° 73,6° from 180 to 189cm

Contacts

FRM Bike Technology S.r.l.

Via E. Mattei 18/A

48025 Riolo Terme (RA)

Italy

Tel. +39 0546 70310
Fax. +39 0546 74623